Tianjin Juneng High-pressure Pump Co., Ltd.
Address: No. 10, Jingtong Road, Science Park, Beichen economic and Technological Development Zone, Beichen District, Tianjin
Tel: 022-26622211
Phone: 13602112500 (Sun Liyuan)
Fax: 022-86879897-8002
Postal Code: 300402
mailbox:sales@junengpump.net
High Pressure Water Injection Pump3S-2.8
3 s - 2.8 plunger pump can be used as a power source for the high pressure water. For size diameter pipeline cleaning, ships the workpiece, cleaning, derusting water, auxiliary cutting purposes, piling, water corrosion can transport water, emulsion and the liquid chemical properties similar to water.
The pump hydraulic end is equipped with safety valve, throttle valve, its own system, adjustable throttle valve to meet the needs of different flow rate. The pump power end for bearing transmission (between the crankshaft and connecting rod). Using splash lubrication, the lubrication can be 24 hours of continuous operation, without cooling. Can form a complete set for the user a variety of cleaning machine, valve, high-pressure pipe, spray gun, etc. According to user requirements, equipped with all kinds of power supply.
Performance Parameter List
|
Maximum Motor Speed |
1470r/min |
Stroke Length |
40mm |
|||
|
Theoretical Capacity |
Motor Power（KW） |
Plunger Diameter |
||||
|
11 |
15 |
18.5 |
22 |
|||
|
M3/h |
L/min |
Rated Discharge Pressure（Mpa） |
||||
|
1.0 |
16.9 |
23.8 |
35 |
46.8 |
63.7 |
15 |
|
1.8 |
30 |
13.4 |
19.8 |
26.4 |
35.9 |
20 |
|
2.1 |
36 |
11.2 |
16.5 |
22 |
29.9 |
22 |
|
2.8 |
47 |
8.5 |
12.6 |
16.8 |
22.9 |
25 |
Note: above parameters are theoretical data when the medium proportion is 1.0.